The task of the Paste Height Controller is to keep the amount of paste on the stencil during the printing process at a constant height. For this, the thickness of the paste roll is measured on the stencil by a laser beam. The functioning is similar to a light barrier.

When falling below the previously set height, solder paste will be automatic/manual dispensed. After several falling below the threshold in a row, an alarm will be triggered. The machine stops and outputs an indication of non-sufficient solder paste.

With the Paste Height Controller misprints can be prevented and the profit can be improved.

The advantages

• Improves the print quality – no printing of boards with insufficient paste

• Reduces the work process by an optimal refilling

• Minimize the paste wastage  

• Easy to use, easy to install  

• Upgradeable for all DEK printer 

• Short Return of Invest

=> Shop